Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Thomas1 Tinkerer Username: Thomas1 Post Number: 8 Registered: 02-2011 Rating: N/A Votes: 0 Posted on Sunday, May 20, 2012 - 04:39 pm:    Hollenbj, Jeff, It looks like someone took the top off the camera and didn't know how to replace it right. The ASA and shutter speeds do not match with the meter graph when compared to other 7s cameras. Also, it looks like a "set bearing" has been left off the micro spring under the dial of the meter High - Low selector. The tops of these cameras fit very close and will pinch the wires for the meter if not done right on reassembly and well what else is there ......[not mentioned in the 7 "repair manual]."?