| Author | Message | ||
     Glenn Tinkerer Username: Glenn Post Number: 999 Registered: 07-2006 Rating: N/A |
Check the archives for information!! Yes - but center screw can be bloody tight, so removed alloy center disc with a needle and then carefully drill two holes in screw head to take a pin wrench. The iso/setting assembly is held tight by a 'wave' washer, this may be bent to give more friction but new parts are the way to go. Note Gossen will provide gratis consumables and small parts - the alloy center disc and the alloy back data plate being just two of these. Go to the following - http://www.gossen-photo.de/english/fotografie.php Click on the repair 'box' and read ALL the information. If yours is a meter that can be repair by Gossen, fill in the request form with the description of the bits you require. Note that They have supplied me with new clear front discs for the black cased 3s at no charge in the past. However I now note that there is a postage/handling charge of 6 euro or 13 euro depending on size of parts required |