Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Naf456 Tinkerer Username: Naf456 Post Number: 1 Registered: 06-2012 Rating: N/A Votes: 0 Posted on Tuesday, June 12, 2012 - 06:53 am:    Hello. My name is Nathan. I Just got hold of my new Fujica ST705w yesterday, however the prism on it had like dead bugs inside it and stuff, so I wanted to clean it. -Long Story short, I Have scratched the paint off the Frame advance lever trying to get it undone (However I just found out it's attached to the body) - I pulled out the Film Pin from the film rewind knob causing a spring to un-clip - breaking the camera (the frame advance lever is completely slack because of this) and now it's just about ready to go in the bin. The Problem I am having, is I just can't get the left had side off! (the side with the film rewind crank) - And have been going for about 2 hours trying to figure out how to get the right side off so I can fix the camera. I have been following the ST705 manuals, however there significantly different from the ST705w - which I have. I just hope someone has a ST705w , they seem quite rare. Thanks For Your Time. Nathan.