Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Agchicago Tinkerer Username: Agchicago Post Number: 2 Registered: 06-2012 Rating: N/A Votes: 0 Posted on Tuesday, June 12, 2012 - 10:48 am:    Hey buddy, I'll answer. On the top of the film advance lever is a black round cap. It has to unscrew off (it is a screw). You unscrew it with a "friction tool". Basically you need something about the same diameter, or a little smaller, and tipped with rubber. Press into the black disc and unscrew. You can buy a tool, but anything with a decent sized soft rubber tip will do. Try cleaning the rubber with windex first, it'll make it nice and sticky.