Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   John_shriver Tinkerer Username: John_shriver Post Number: 84 Registered: 12-2006 Rating: N/A Votes: 0 Posted on Friday, June 29, 2012 - 07:05 pm:    At the other end, you will need to drill out the four rivets holding the front frame to the front standard. (Remove the lens and shutter first.) Replace them with 0-80 or 1-72 flat-head screws and "small form" nuts. However, I'd find it hard to get excited about replacing a bellows on a "Junior" Kodak, rather put the effort (and presumably NOS bellows) on a model with a better lens and shutter. Of course, unless you want a rather soft lens.