| Author | Message | ||
     Geg_thomas Tinkerer Username: Geg_thomas Post Number: 1 Registered: 09-2012 Rating: N/A |
Originally posted this on flickr and got a recommendation to post here... Coppee/pasta: Recently I had to fix a problem of the shutter staying open and not closing unless I slid the aperture arm back and forth. After taking the entire shutter diaphragm apart, I managed to fix it and it's working smoothly. However, the piece of paper that I had written notes on regarding the orientation of lens and other pieces has gone missing in my studio. All I have to do is put the 2 lens elements back into the diaphragm but I'm having trouble. I think the convex (curved out) lens goes at the back, with the most curvy side facing the film plane. I think the concave one fits in the middle, with the smaller side with a black beveled edge faces the front lens, but I'm not 100% on this as the plans for the triplet lens online suggests the smaller beveled side faces the film plane. Also, I have three ring clips but I can only figure that two will go into holding the remaining elements in place, which makes me wonder where the third fits. Possibly inside the camera body once the diaphragm is back on? I do not know. Two of the rings are the same size and thickness while the other is slightly smaller but thicker... I could simply put it together and test it, but having partly tried that I can't find a place for the third ring. Having searched this in depth online, I found an example where the middle lens element was smashed because it wasn't held in place properly due to the ring, and I'm fearful that this could happen if I put it all back to test it out. Any help would be greatly appreciated  |