Msiegel
Tinkerer Username: Msiegel
Post Number: 343 Registered: 03-2008
Rating: N/A Votes: 0 | Posted on Monday, May 20, 2013 - 09:03 am: | |
I have a Mamiya Ruby that had a similar problem. With mine I did the following: I peeled back the leatherette around the lens to get access to 4 screws holding the lens board. Those screws were not loose as I had hoped but the lens/shutter assembly was loose on the board. I opened the four screws and removed the complete board with lens and shutter which gave me access to the screws holding the shutter/lens assembly to the board. I tightened those and put everything together again. But as I said it's a different camera so design might have changed. Not sure if that helps you at all. Good luck! Martin |