| Author | Message | ||
     Fidji Tinkerer Username: Fidji Post Number: 50 Registered: 12-2011 Rating: N/A |
The 'bears' bit is when you have to remove the whole shutter unit from the body. This has to be done to reach the shutter cocking and shutter release mechanisms, which can gum up. Then you are in serious 'can't put it back together' territory. You have to wind a spring loaded gear wheel the right number of turns and hold it in the right position to fit the shutter unit back on the body. This I have achieved twice. But if there are problems with the light flap that comes down between exposures........your talking dark forces and magic.......don't go there! |