| Author | Message | ||
     newindustar Rating: N/A |
Well I am down to the meter cell rewire. I am stuck at one point now. My meter cell wires sheared off at the level of the aperture ring. I have the whole camera apart with the shutter seperated. I need to run new sensor wires but I can’t access the tiny shutter channel the wires run through unless I can remove the aluminum aperture adjustment ring from the shutter assembly. It is loose and I cannot see anything restricting its removal but I can’t take it off. Unfortunately where the wires pass through the shutter it is not a straight hole but runs through a tight channel first for about an inch before they exit out the back. I even thought of drilling a new hole straight through but it seemed I’d run into problems there. Have you any idea how to remove the aperture ring from the shutter? Thanks |