| Author | Message | ||
     Winfried Rating: N/A |
It depends... if you have a Paxette with just one sprocket wheel you have to remove the four screws around the film gate and you can take off the lens mount. The rest is similar to other cameras. If you have a Paxette with sprocket shaft, two screws are hidden behind it, and you have to remove the shaft. It can be removed quite easily by removing the sheet metal part on the bottom of the camera, you can pull out the inner axis (there are some small parts inside) and remove the shaft. But to install it again you have to remove the top cover. NEVER remove the screw on the advance lever! Disassemble the advance shaft from the bottom, i.e. remove the screw inside the fork shaped part and lift the advance lever assembly. Now you still have to remove some screws around the top cover and can lift it. The axis of the sprocket shaft is oval at one end and has to pass through an oval hole in a gear wheel. |