charlie
Rating: N/A Votes: 0 | Posted on Tuesday, April 11, 2006 - 07:13 am: | |
I have repaired pinhole leaks (at the corners) as follows; open the camera front and back, push a common pin down through the hole until I can see the pin on the inside, coat the pin point with black silicone rubber (RTV), pull the pin back up through the hole, Put a smear of RTV on the outside, let the camera sit open for sveral days to allow the RTV to cure thoroughly. I have done several bellows successfully by this method but I don't know how long it will last. Long enough to evaluate the camera and see if bellows replacement is worth while. |