Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Pho88 Tinkerer Username: Pho88 Post Number: 4 Registered: 08-2006 Rating: N/A Votes: 0 Posted on Thursday, August 31, 2006 - 09:36 pm:    Hi- Back again... I got the nut off the ASA assembly, cleaned everything up and reassembled it. No change. The meter is stuck on ASA1600 readings now. The washer Don spoke of seems to be properly crimped and applying the correct pressure. I assume the trouble is deeper in the guts of the camera. I've stopped short of popping the top off the camera (I need a friction driver first.) Any suggestions?