Glenn Middleton
Tinkerer Username: Glenn
Post Number: 23 Registered: 07-2006
Rating: N/A Votes: 0 | Posted on Tuesday, August 15, 2006 - 08:57 pm: | |
1/ Does the bit your fingers and thumb are on, unscrew from the actual threaded part? 2/ Is that a retaining ring with no slots at the bottom of the housing - thus needing a rubber bung to unscrew? Open up iris and look in from back of lens to see if the lens is retained by a ring facing rearwards. If no sign of rear retaining ring, then lens will be retained by that ring requiring a friction tool. 3/ The alternative is that all that stuff on the rear comes off and the lens is held in by a ring from the back. I cannot make out what is exactly on the back of the above assembly, or how it is retained. Can you see any separation/part lines anywhere. |