Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Graeme Lugg Tinkerer Username: Grug Post Number: 2 Registered: 08-2006 Rating: N/A Votes: 0 Posted on Monday, August 28, 2006 - 09:13 pm:    Thanks for your response, Glenn. I have attached a photo of this rangefinder. As can be seen, there is a smooth cap in the centre of the dial, but I can't seem to be able to remove it - any advice here would be welcome. There is also a square recess to the right of the viewfinder. At first I thought this was the adjusting screw, but it looks like a solid pin of some sort, slightly domes in shape. The two holes at the very end are for vertical alignment. So, again any further help is most welcome.