Updates:

Welcome to our updated forum!  VIP Members can reset their password using their username or email address.

Canon F1 batteries

Started by Ben_hutcherson, Oct 26, 2006, 09:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Canonfodder

Oct 26, 2006, 09:52 PM Last Edit: Sep 23, 2024, 05:43 AM by smf_adm
Can anyone get hold of the 1.35V button batteries that power the F1's meter? They were PX625s I think but everyone seems to rate them at 1.5V now - assume that might damage my camera or cause meter error (???)

Loosecanon


Ben_hutcherson

Oct 30, 2006, 12:06 AM #2 Last Edit: Sep 23, 2024, 05:43 AM by smf_adm
Forget the pricey Wein cell and just use a 675 hearing aid battery. They both put out the same voltage, but the 675 is smaller and without the lip that makes it into a flying saucer shape. You can use an O-ring to take up the extra space if you need to, although I haven't found this to be necessary on my FT and FTb. I'm not sure about the F-1.
 
I was able to get 16 675s on sale for around $5. They normally run around $.75-$1.00 each. They are rated to last a month, although I've had one in my FTb since I got it in June, and it still tests fine.