| Author |
Message |
    
Bengt
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, June 07, 2004 - 12:32 pm: | 
|
Hi! Please help me to remov the rewind lever, I have 2 C35;s and they are fixed in different ways to the film rewind shaft. I have problem with the rewind lever fixed with a small bolt. |
Jan Dvorak
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, June 07, 2004 - 04:33 pm: |
|
Hold the inner part of the rewind spindle (one inside the camera) to prevent it from turning, using pliers - be careful not to scratch or bend anything. Than - turn the rewind crank anticlockwise, it should come off.
Good luck,
Jan |
Bengt
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, June 07, 2004 - 05:20 pm: |
|
Thank you Jan!
I have tried to turn it anticlockwise and also clockwise,but it´s still there. The rewind spindle is made of plastic and the rewind crank of aluminium. I have removed the small bolt which hold the rewind crank but the "wheel" dosen´t come off when I am turning it, perhaps it´s glued to the rewind spidle? I can´t use much force because of the weakness in the materials.
Ps! The other C35 has no small bolt, and the crank is a bit thinner, the spindel come off very easily when turning it anticlockwise.
So Jan and others with experience of the Konica C35 automatic, what can I do? |
Bengt
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, June 24, 2004 - 08:36 am: |
|
Hi Jan!It come off turning the rewind crank anticlockwise,using force!
(no plastic in the materials) |
|
