Pentax Super A (Super Program) all lo...

Log in | Log Out | Topics | Search Moderators | Register | Edit Profile

Thread Last Poster Posts Pages Last Post Archive through September 06, 2006 Don 2  1  09-06-06  07:47 am   Closed: New threads not accepted on this page

Author Message   Rataskanken Tinkerer Username: Rataskanken Post Number: 2 Registered: 09-2006 Rating: N/A Votes: 0 (Vote!) Posted on Thursday, September 07, 2006 - 05:45 pm:        Thanks for the tip Don. However, it is not clear which lever to activate. I have tried the release lever in the Winder attachment socket (pushing the lever marked A in the picture in the link below to the right) with no result. This was also the lever I tried in vain before removing the bottom plate. I have marked the other identifable levers with letters, in case you can lead me any further. Thanks for the help so far! http://www.kikidu.com/pix/SuperA_Bottom.jpg   Don Tinkerer Username: Don Post Number: 15 Registered: 07-2006 Rating: N/A Votes: 0 (Vote!) Posted on Thursday, September 07, 2006 - 07:39 pm:        lever is below the slot or cutout at the top front of the plate w/the #s on it - go straight up just above the wires. Use a flashlite & mag. glass to see it. Its about 1/4" long & should be silver. Using a small screwdriver, push it forward from its back L side -- shutter should release. Try cocking & releasing it a # of times & it might solve the problem.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and moderators may post messages here. Password: Options: Enable HTML code in message Automatically activate URLs in message Action: