| Author |
Message |
    
Simonjko
Tinkerer
Username: Simonjko
Post Number: 2
Registered: 02-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, February 16, 2008 - 01:42 pm: | 
|
I repaired a broken shutter on F3 and am in the process of reassembling it.
However, I think I got my wiring diagram mixed up. I only get 1.5v on Vcc and I should have 2.4v.
Does anyone outhere have a wiring diagram for F3 old FPC? More specifically, I need master on/off switch wiring colors. There are four wires and I need to match them. While at it, there is a small circuit that green magnet gets attached to. Anyone with that wiring would help.
Thanks.
Simon Ko |
Rick_oleson
Tinkerer
Username: Rick_oleson
Post Number: 510
Registered: 07-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, February 17, 2008 - 08:26 am: |
|
Hi Simon:
Sorry, I don't have that, but for future reference I have a tip from years of working without manuals or wiring diagrams (or digital cameras): instead of desoldering wires i got into the habit of cutting them off, leaving 1 or 2mm of insulation so I could tell which one went where when I put it back together. These days, I keep a digital camera handy to snap a shot of everything before i disturb it. |
Krp
Tinkerer
Username: Krp
Post Number: 64
Registered: 07-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, February 17, 2008 - 10:59 am: |
|
You can find the PDF repair manual for the F3 here under F series:
http://www.ss-it.de/arcticwolf/nikon/service.htm |
|
