Chuck_a
Tinkerer Username: Chuck_a
Post Number: 4 Registered: 04-2008
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, October 12, 2008 - 12:06 am: |
|
I recently modified my Trip35 to full automatic in both A and manual mode. 1.remove top and bottom plates 2.peel back leather and remove face plate under viewfinder 3.set camera @ A and cover lens, depress shutter button,raise the red flag,observe the foot or stopper on the lower portion of the red flag fixture,carefully bend it down to allow it to move freely out and back under the aperture ring set at 2.8(manual mode),normally the foot or stopper would catch on the inside of the aperture ring at 2.8 not allowing the red flag to rise and not allowing the meter needle to trap at 1/125 speed. 4.point lens at a light source to move the meter needle out from under the viewfinder,now place a thin strip of tape along the side of the viewfinder,this will de activate the red flag warning in both modes allowing for low light wide open shots at 1/30 speed. 5.if you have a dead meter, remove meter faceplate and check for debris obstructing needle movement, if not, carefully align the needle so it traps at 1/125(one speed only) and place a thin strip of tape on the meter faceplate along the right side of the needle to hold it in place. 6.now check all f stops and speed changes in manual mode and A mode 7.now you have 1/125 and 1/30 in both modes, and your choice of f4-22, or leave it on 2.8 or A 8.mod images posted on flickr,Trip 35 group. |