| Author |
Message |
    
Rayw
Tinkerer
Username: Rayw
Post Number: 6
Registered: 12-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, January 08, 2010 - 04:28 pm: | 
|
Can anybody give me advice on how i adjust vertical alignment on the rangefinder for a MK1 Canonet (the one with the bottom winder) |
Bossman
Tinkerer
Username: Bossman
Post Number: 114
Registered: 02-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, January 13, 2010 - 12:41 am: |
|
Not sure if I can picture that model but try removing the accessory shoe cover........... many Canon's have a portal there for adjustment of the RF......if that doesn't do it..send me a picture of the top and back of camera please. Art......[email protected] |
Rayw
Tinkerer
Username: Rayw
Post Number: 7
Registered: 12-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, January 13, 2010 - 02:13 pm: |
|
Hi
Thanks for responding to my post.
I have an old spares canonet, which I have removed the top and moved the rangefinder cover.
There is on hole at the left side on the cover that lines up with a screw.
I assume that this is for left to right alignment.
But i am not sure how to align the spot top to bottom.
There apears to be nothing beneath the flash shoe. |
Rayw
Tinkerer
Username: Rayw
Post Number: 8
Registered: 12-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, January 13, 2010 - 02:18 pm: |
|
 |
Sandervw
Tinkerer
Username: Sandervw
Post Number: 1
Registered: 01-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, January 27, 2010 - 04:37 am: |
|
That's funny I just bought the exact same camera to tinker with. It's my first project, so all very exiting.
I managed to adjust the vertical alignment with the little screw on the back of the mirror. It controls the tilt.
See picture:
 |
