    
Thomas Pfeifer
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, August 02, 2005 - 07:46 am: | 
|
Some more information is required to give an advice: Is the winding lever stuck and cannot be moved or are you still able to operate the winding lever, but without any movements inside the camera?
In case of the second problem, it is very likely that just a little spring inside the camera is out of position. When you wind on the camera, a little spike is pressed radially into the winding shaft and pushes everything forward. With the winding lever going back to its initial position, this little spike moves to the next notch at the winding shaft and is fixed there by a little spring. Now, if this spring flipped off, the winding mechanism does not work.
You have to open the camera body in order to check this. If you need further advice and/or pictures, feel free to send me an e-mail directly.
Thomas |
