Author |
Message |
Roy Smith
Rating: N/A Votes: 0 (Vote!) | Posted on Monday, February 20, 2006 - 07:05 am: |
|
HI. I have a Minolta XG-1 and went to use it after being stored for a couple of years only to find that the shutter won't release. The old batteries were gone so I got a new set and they test ok. Now when I fisrt turn the camera on I can see the red indicator lights on the right side but when I hit the button, the lights disappear and the shutter doesn't release. I can't even get the film installed because it won't let me advance the film. Even bought a second set of new batteries. Camera worked fine before. Thanks for any help. Roy |
Winfried
Rating: N/A Votes: 0 (Vote!) | Posted on Monday, February 20, 2006 - 11:29 am: |
|
This seems to be the dryed capacitor syndrome. The capacitor is supposed to store some energy for the shutter solenoid. If it does NOT supply that energy any more the solenoid will draw too much current from the battery and will not release the shutter. I do not know whether the capacitor(s) are on the same location(s) as on the X300 series (I have heard there are TWO capacitors which may fail). I think you will find information in the archives of this forum or somewhere else in the web. |
Charles Miller
Rating: N/A Votes: 0 (Vote!) | Posted on Saturday, March 25, 2006 - 01:20 am: |
|
Hi, I've got a vintage Argus hotshue flash that requires a specific power supply configuration. It requires: One 22.5v B.Battery (which I've already found), and One 200mfd 30v capacitor Each of these items is about the size of a AA battery, and they snap into the flash battery case side-by-side. The required capacitor apparently has a flat positive terminal on one end and a flat negative terminal on the other, very much like a typical battery. I'm not sure of the age of the camera (an Argus C-Four) or of the Argus flash (no obvious model number), but I'd hazard a guess at late 50s to early 60s (?). Can anyone advise me as to where I might find this magic capacitor? Thanks very much for your time and reply! |