| Author |
Message |
    
Apeiron
Tinkerer
Username: Apeiron
Post Number: 1
Registered: 11-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, November 13, 2006 - 02:43 pm: | 
|
Hello.
a few days a go i just push the rewind button which placed in bottom side of body. and pull the rewind crank. and then my body jammed  when i pull the rewind crank end off the pull the shutter fires by itself but one of the curtain doesnt work and also the shuttle not locked so i cant use the button neither. is it fixable? what can i do i am afraid of to open the body for repair man if he cant reassembly the body. |
Krp
Tinkerer
Username: Krp
Post Number: 9
Registered: 07-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, November 13, 2006 - 06:02 pm: |
|
Is the frame counter window still visible? They are notorious for coming un-glued and fall in the works |
Apeiron
Tinkerer
Username: Apeiron
Post Number: 2
Registered: 11-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, November 14, 2006 - 03:09 am: |
|
counter is visible but not count on 6 |
Glenn
Tinkerer
Username: Glenn
Post Number: 107
Registered: 07-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, November 14, 2006 - 06:29 am: |
|
Are we getting a bit muddled here? Seems to me, you have not answered Krp's question. In the rectangular cut out on top cover-plate (to view numbers), is there the clear plastic protective window? If this is missing you will be able to touch the counter disc with a screwdriver or similar. As Krp stated, if this window falls into the 'works', all kinds of problems can arise.
Sorry to be asking what might appear to be a stupid question. Raising the point now may result in a quicker answer to your problem. |
Apeiron
Tinkerer
Username: Apeiron
Post Number: 3
Registered: 11-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, November 15, 2006 - 01:49 am: |
|
Sorry guys i am dumb at the technic or mechanical things so i bring it to the repair man. he said he explode the body and reassembly he said he can solve the problem.
Thanks for your interest... |
