Who are we?  Featured Cameras  Articles  Instruction Manuals  Repair Manuals  The Classic Camera Repair Forum  Books  View/Sign Guestbook

Canon AE-1 squeak repair gone bad Log in | Log Out | Topics | Search
Moderators | Register | Edit Profile

Classic Camera Repair » Archives-2004 » Canon AE-1 squeak repair gone bad « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Tom

Rating: N/A
Votes: 0 (Vote!)

Posted on Sunday, July 25, 2004 - 08:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

I own a Canon Ae-1 with infamous shutter squeak. After researching several sites I decided to take a crack at it. Opened the top cover and pored several drops of oil into the right hand side of the lens mount, as described. Now the camera is completely dead. Meter seems to be working but camera wouldn't release.

Does anybody know what I did wrong? Please help!!!!

Thanks much
Tom
Top of pagePrevious messageNext messageBottom of page Link to this message

Harlee

Rating: N/A
Votes: 0 (Vote!)

Posted on Monday, July 26, 2004 - 07:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

I'm not sure what happened to your camera Tom, but you may want to try a new battery just to make sure it had enough power to trip the shutter. When the battery goes bad, everything shuts down on these A-series cameras. You may want to check out my post on lubing the mirror gears in an AE1P. It should be the same for an AE1. It can be done very easily from the bottom of the camera after removing the bottom plate, 3 screws. A 5 minute job to remove the bottom plate and lube the mirror gear.
Top of pagePrevious messageNext messageBottom of page Link to this message

Harlee

Rating: N/A
Votes: 0 (Vote!)

Posted on Monday, July 26, 2004 - 07:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

My other post was on 7/21 - scroll down to it and check it out.
Top of pagePrevious messageNext messageBottom of page Link to this message

Luis

Rating: N/A
Votes: 0 (Vote!)

Posted on Monday, August 16, 2004 - 02:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

I have three AE-1P's that had the mirror box squeak problem. I have to say that there is a lot of bad advice out there regarding lighter fluid, 3in1 All purpose oil, slick50, and even WD40.

The mirror box takes a light grease on the gears, no less. You must at least take off the top of the camera and apply the grease directly to the gear. If you spray crap into areas you do not see, you will probably damage the electronics. If you are lucky enough not to damage the camera's electronics, then you will most likely do it the next time because...you applied the wrong kind of lubricant.

Proof is in my two dead cameras and one live one. I know you probably will ignore my post and try it anyway and be forced to buy another camera. If that is the case....sorry.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration