I am just unable to get the return springs for the winding lever and frame counter back in place. I try to hold them down, but as soon as I put the top cover back on the springs snap open again. There must be a trick to make this work. Does anybody out there have any idea?
are you sure that you fixed those two springs to the correct hooks? After my experience, for instance the return spring for the winding lever is normally in a position where it just cannot snap off during the reassembly of the top cover. So if you have a picture of your camera with some marks of your proposed positions, I could possibly give you some advice. Feel free to send pictures or some additional information to my e-mail-address.
