| Author |
Message |
    
ian
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, November 09, 2004 - 01:22 pm: | 
|
HI all
i have a pentax me f which i need a reference for the wiring that sits to the right of the prism to reconect it. I thought i had the notes correct but am not sure . also found the release contact wire under neath and not sure which pin this goes to.
thanks in advance
ian |
Harv
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, November 09, 2004 - 01:47 pm: |
|
I'm not familiar with an ME f model but there is an online repair manual for an ME at:
www.robertstech.com/pentax.htm. It's linked to this forum in the left hand bar.
Harv |
[email protected]
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, November 09, 2004 - 02:04 pm: |
|
I have just downloaded this manual and its great. Similar to the me f but I am not yet convinved identical. the area is covered here and is obviously an area to watch for. hopefully someone willhave the answer.
regadrs
ian |
ian
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, November 10, 2004 - 06:22 am: |
|
brilliant manuals. problem was the five contacts that are above the switch use four wires as i had notes down. the catch was the hard wire friom the switch attaches to a very fine wire underneath that is almost invisable. fixed now!!! |
ian
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, November 15, 2004 - 01:20 pm: |
|
hmm
thougth i had sorted this one but find leds are working ok but shutter time is not???? help |
Henry
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, November 16, 2004 - 08:09 am: |
|
Were the speeds working previously? If so it is probably a solder joint.
Henry |
