| Author |
Message |
    
Tony Quitadamo
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 06, 2005 - 05:29 pm: | 
|
Hi,
I've just put a roll of film through the camera and all seemed fine until I got to the end. The chank lever has stopped after taking the last frame and will not advance.The window that shows exposure number shows the end symbol. I opened the back and removed the film but camera will not wind on now.
Can anyone help? Thanks |
cao yuewu
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 22, 2005 - 06:58 pm: |
|
Hi,
You can turn the chank lever uncolockwise and push the counter reseter on the camera body when you open the back you can see it,just try! |
Tony Quitadamo
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 28, 2005 - 12:55 am: |
|
Hi,
Thanks for the response, but that's not the answer. Film will wind on but doesn't stop at set exposures
just winds to the end. So I assume something has broken inside.The roll I put in originally went through OK until the end and developed OK |
Glenn Middleton
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 28, 2005 - 07:40 pm: |
|
Seem to remember in my only dive into a Mat, that the frame interlock is partly worked by the semisprung shaft that bears on the rotating roll of film.Is this shaft and wheel free to rotate and bear on film roll? |
Tony Quitadamo
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 29, 2005 - 03:23 am: |
|
Hi,
Yes that's working fine. All was well until I got to end of last exposure then crank would not advance last bit of film to end. Had to open back in darkroom. Then tried crank and no problem but exposure dial stuck on end symbol and film is advanced to the end, no stopping at each frame. Everything else works fine. |
Tmas
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, September 28, 2005 - 09:11 am: |
|
Maybe it does only work with film? |
