Author |
Message |
Berk Sirman
Rating: N/A Votes: 0 (Vote!) | Posted on Monday, January 09, 2006 - 01:58 pm: |
|
I have bought a Konica Auto S2 in very good shape and everything is working right but the lens/shutter is wobbling a bit. The focus and aperture ring are kind of ok but the shutter speed ring is wobbly and I checked the rear element while wobbling the shutter speed dial and the rear element is kind of moving too. Do you know how I fix this? My camera did not com with a built in lens hood as some do. Which aftermarket product would you recommend? Thanks in advance, Berk |
Jan Dvorak
Rating: N/A Votes: 0 (Vote!) | Posted on Monday, January 09, 2006 - 11:44 pm: |
|
Berk, When you openthe film back and look toward the rear element, you will see a concentric ring. Make sure this ring is tight. This sometimes causes the lens assembly to wobble a little. You can use any 55mm standard lens shade, or check this eBay auction: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7578296664 Good luck, Jan |
Berk Sirman
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, January 10, 2006 - 05:04 am: |
|
I checked that ring and it is already tight. I found a thread in the archives and maybe I'll try that later today:https://kyp.hauslendale.com/classics/forum/messages/674/1083.html?1046021841 Thanks for the ebay link, that is what I was looking for. Regular shades may obstruct the rangefinder. Berk |
Berk Sirman
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, January 10, 2006 - 05:34 pm: |
|
Update: I cannot find where to tighten at the back of the shutter asembly. I removed the front plate from the body and removed the rear element but cannot find a collar there to tighten. Berk |
Jan Dvorak
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, January 10, 2006 - 11:10 pm: |
|
Berk, This page should give you plenty of information on the Auto S2: http://feuerbacher.net/photo/frame.html?Cameras/Electro35/Electro35.html~Main Just click on the Konica Auto S2 link..... All the best, Jan |