Author |
Message |
Stefan
Rating: N/A Votes: 0 (Vote!) | Posted on Friday, June 23, 2006 - 03:21 am: |
|
My Pentax ME super behaves as if batteries are empty, there is no electrical function anymore. Of course batteries are not empty and polarity is correct. Has anybody got an idea what the reason is - are there any typical faults which migt be responsible for this? |
Tom
Rating: N/A Votes: 0 (Vote!) | Posted on Saturday, June 24, 2006 - 02:57 pm: |
|
The ME suffered from a series of redesigned circuit boards, all of which can short out or break over time and require replacement, and parts are generally unobtainable these days. But you can check for power breaks at least. If the shutter operates only on its mechanical speed at Auto, and the LEDs don't turn on, you should check the battery voltage at the flex circuit. Check for +3V between ground and each red wire at top of the flex board. If there's no voltage, check the battery contacts for corrosion loose/wires and power (red) wire solder connections. Then check the main power switch for +3V at center lead (un-insulated connector) to the front-plate circuit board. If there's still no voltage, check the main switch for poor contact. You can also check the main switch by shorting between the red wire at the flex circuit and the center terminal at the front-plate circuit board. The short should turn on the meter. If it does, the main switch is the problem. |
Stefan
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, July 04, 2006 - 12:34 am: |
|
Okay, I will check flex prints and switches. Do I need any special tools exept small screw drivers to remove the top cover of the camera? |
|