Author |
Message |
Slamarca
Tinkerer Username: Slamarca
Post Number: 6 Registered: 02-2007
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 23, 2007 - 08:36 am: |
|
Hi all, I have a Zeiss Contaflex Prima that worked flawlessly on my first roll of film. Now in the mid of the second roll the advance lever seem to have disengaged from the film transport sprocket. Even the mirror that should be lowered by the action of the advance lever has blocked mid-way. The advance lever moves freely but with no effect. I read that this camera is difficult to open so I would like to know if the problem described can be repaired or not. Greetings, Sergio La Marca Italy |
Rick_oleson
Tinkerer Username: Rick_oleson
Post Number: 284 Registered: 07-2006
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 23, 2007 - 04:00 pm: |
|
I have a sketch for getting the lever and top cover off, but I don't know if this will get you to where the problem is. It should be a start in the right direction at least. Email me at [email protected] if you would like a copy. |
Rick_oleson
Tinkerer Username: Rick_oleson
Post Number: 285 Registered: 07-2006
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 23, 2007 - 04:03 pm: |
|
no, wait, i think you already have it on the CD. |
Slamarca
Tinkerer Username: Slamarca
Post Number: 9 Registered: 02-2007
Rating: N/A Votes: 0 (Vote!) | Posted on Thursday, May 24, 2007 - 03:07 am: |
|
Yes I have the CD, I'll check your sketches. I wondered if it was a task that I'd be able to embrace. Thanks as always. Sergio |