| Author |
Message |
    
Horosu
Tinkerer
Username: Horosu
Post Number: 1
Registered: 04-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, April 22, 2007 - 02:25 am: | 
|
Hello,
I am the owner of a Zeiss IKON ZM (Leica M-mount) rangefinder camera. I would like to know how to adjust the infinity setting of the rangefinder, as it is off.
This seems to be THE most frequent complaint on this camera.
Thanks, Horea |
Rick_oleson
Tinkerer
Username: Rick_oleson
Post Number: 245
Registered: 07-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, April 22, 2007 - 04:39 pm: |
|
This must be pretty new: doesn't the warranty cover something like this? |
Horosu
Tinkerer
Username: Horosu
Post Number: 2
Registered: 04-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, April 23, 2007 - 04:15 am: |
|
It is out of warranty as it was bought more than a year ago. However, I would be very much interested in doing it myself.
Some brave guy took the flash mount apart only to discover a hidden screw there: |
Rick_oleson
Tinkerer
Username: Rick_oleson
Post Number: 247
Registered: 07-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, April 23, 2007 - 06:55 pm: |
|
It's common in RF cameras to provide adjustment access through a hole under the shoe, but I don't know anything about the ZI ..... |
Lewis44
Tinkerer
Username: Lewis44
Post Number: 1
Registered: 12-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, December 14, 2007 - 10:44 am: |
|
Had the same problem, Infinity off. Took the shoe off and the screw you see is the adjustment. Left turn will adjust if infininty is focusing to close and right if it's past. A very slight turn is all that should be required |
