| Author |
Message |
    
Konicakrazy
Tinkerer
Username: Konicakrazy
Post Number: 3
Registered: 12-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, May 13, 2008 - 10:17 am: | 
|
Bought Konica T-3 repair manual from Finger Lakes, and it refers to drawings which were not included. They were not represented as being part of purchase, and that's OK. But, does anyone know where to get them. |
Erirah
Tinkerer
Username: Erirah
Post Number: 7
Registered: 08-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, May 13, 2008 - 01:43 pm: |
|
Not really an answer to your question, but...
I have the "Technical Illustration" part of the Konica T3 Service Manual. It is some 30-40 pages or so, half of them are fold-outs with the exploded views on them. Too wide/too much work to run them all through my scanner, but if you need a certain page then I may be able to help. |
Konicakrazy
Tinkerer
Username: Konicakrazy
Post Number: 5
Registered: 12-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, May 14, 2008 - 09:38 am: |
|
Hi,
Thank you so much for getting back to me. What I am really interested in, is the removal of mirror box and accessing the battery box to replace wires up to the meter circuit. I love these particular cameras and see many that need battery box wires and would love to become proficient at it. ould gladly pay you for your trouble.
Tom, in Florida |
Gez
Tinkerer
Username: Gez
Post Number: 28
Registered: 09-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, May 16, 2008 - 03:01 pm: |
|
Rick's Tech Notes are pretty good for the A3, but before you remove the prism off the T3 you will need to place a screw to hold the spring loaded shutter speed indicator display in place. It can be a real pain to get the display back in register with the shutter speed dial.
I have just finished replacing the battery wires on T3 and found the National Camera / Camera Craftsman article on the T3N very useful.
Yes, the T series are just great, but let's not shout it from the roof tops as they are fairly cheap just now! |
Guyb
Tinkerer
Username: Guyb
Post Number: 4
Registered: 03-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, May 17, 2008 - 06:41 pm: |
|
Not drawings but lot's of info on T3 at Matt's great site:
http://mattdentonphoto.com |
Erirah
Tinkerer
Username: Erirah
Post Number: 8
Registered: 08-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, May 23, 2008 - 09:26 am: |
|
Hi Tom,
It's been a busy week, but I now have four exploded views from the Technical Illustration manual for you. Upload is limited to 450x450 pixels, so they didn't make it although they total just 130 kB. I'll send them to you off list.
I wish you success with the repair!
Cheers,
Erik |
Konicakrazy
Tinkerer
Username: Konicakrazy
Post Number: 7
Registered: 12-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, May 23, 2008 - 02:04 pm: |
|
Erik, Thank you so much for your help. The drawings are great.
Thanks, Tom in Florida |
