Author |
Message |
Chiccolini
Tinkerer Username: Chiccolini
Post Number: 46 Registered: 06-2009
Rating: N/A Votes: 0 (Vote!) | Posted on Saturday, August 01, 2009 - 08:26 am: |
|
Generally chrome is easy to clean but Minox has a matte chrome, especially on the film loading slide, that seems to absorb dirt. I have tried the usual lighter fluid, rubbing alcohol and soapy water but none of that does any good. What is the answer? |
Gez
Tinkerer Username: Gez
Post Number: 129 Registered: 09-2007
Rating: N/A Votes: 0 (Vote!) | Posted on Saturday, August 01, 2009 - 01:54 pm: |
|
Try bath cleaning cream, (in Britain called Jif or Cif), on a cotton tip. Don't use ones containing chlorine, they will be too aggressive. |
Chiccolini
Tinkerer Username: Chiccolini
Post Number: 47 Registered: 06-2009
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, August 04, 2009 - 04:37 pm: |
|
I am not familiar with those exact name brands but get the idea. Will try it with the equivalent product on this side of the pond. Thank you. |
Glenn
Tinkerer Username: Glenn
Post Number: 637 Registered: 07-2006
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, August 05, 2009 - 12:45 pm: |
|
You should be aware that 'matte' chrome is in fact porous, so be very careful when using household cleaning products. The chemistry of some 'chlorine free' products will cause damage to the substrate, unless you can really wash off the components. I will happily use a very aggressive household cleaner (Cillit Bang), to clean all types of chrome finishes on parts that I can rinse off in my ultrasonic bath. If it is impossible to rinse the parts in the bath, then I do not use this cleaner. Many matte chrome parts look grubby because sweat and body oils have started to react will the metal substrate, this is especially so when the parts are made from brass. Parts made from plated steel just tend to rust pit, but matte plated brass reacts differently - when viewed under a high powered microscope the porous surface appears to be full of black corrosion products. |
Chiccolini
Tinkerer Username: Chiccolini
Post Number: 48 Registered: 06-2009
Rating: N/A Votes: 0 (Vote!) | Posted on Friday, August 07, 2009 - 04:17 pm: |
|
That makes a lot of sense. I figured it was something like that but didn't understand the reason why. Thanks. |
Tom_cheshire
Tinkerer Username: Tom_cheshire
Post Number: 134 Registered: 04-2009
Rating: N/A Votes: 0 (Vote!) | Posted on Monday, August 24, 2009 - 09:50 am: |
|
A not-really-recommended fix would be to thin some silver paint and just "wash" it over that chrome with a Q-Tip then wipe it off. Do it over a few times until the silver gets absorbed into the dirty chrome. An alternate application method is dabbing with a sponge cut to the proper size if you want a heavier coat. |