| Author |
Message |
    
Waynemel
Tinkerer
Username: Waynemel
Post Number: 35
Registered: 08-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, November 09, 2009 - 09:08 am: | 
|
Does anyone know what viewfinders will fit a Sensorex II? I have the camera and would like to get another viewfinder, but I have come across different labels for the different finders. On Ebay there are a couple labelled as "Type I" and "Type III". In documentation from Miranda they are called "VF-1" and "VF-3". In the manual I have for the camera there is another letter added. Are they all interchangeable? I don't want to be stuck with a item I can't use. |
Rlc
Tinkerer
Username: Rlc
Post Number: 90
Registered: 07-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, November 09, 2009 - 01:25 pm: |
|
Wayne; Try this link: http://www.butkus.org/chinon/miranda/miranda_sensorex/senorex.htm
See second section of Butkus' manual.
Richard. |
Mndean
Tinkerer
Username: Mndean
Post Number: 171
Registered: 08-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, November 09, 2009 - 03:51 pm: |
|
Sensorex finders I don't know that much about, there were two different types, the early one the same as the Automex and has a lip that fits into the front trim plate, the later one changed to show the Miranda logo out front.
Don't buy a model A-G or Sensomat finder for a Sensorex, it definitely won't fit. If you look at them closely, you can tell the differences. The Sensorex finder is wider for one thing. |
Waynemel
Tinkerer
Username: Waynemel
Post Number: 36
Registered: 08-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, November 10, 2009 - 06:18 am: |
|
Thanks folks.
I think I'm going to avoid buying anything that doesn't have the same designation as what is in my manual (VFE-1 and VFE-3). I think the ones that I was looking at were for an older model and may not fit. |
