David_nebenzahl
Tinkerer Username: David_nebenzahl
Post Number: 104 Registered: 12-2009
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, January 26, 2010 - 11:00 pm: |
|
Of course when I took off the plate on the front of my Aires III that holds the shutter assembly onto the body, I managed to break off a piece of the leatherette. My bad; had I read Dan Mitchell's page on disassembling the III L, I would have been forewarned that the leatherette on these cameras is very brittle and that heating with a hair dryer would be in order. I just lost a small piece. Does anyone know of a source of a similar covering material I could use to try to hide my boo-boo? I only need a tiny bit, and would hate to have to buy a whole sheet of the stuff just for this cover-up. I know Micro-Mark and others sell leatherette, but I don't know if it would match the Aires or not. I'd describe this covering as fairly large-grained, not finely textured. Also fairly thick. Unless someone has a spare Aires for parts laying around ... |