Author |
Message |
Blacknoise
Tinkerer Username: Blacknoise
Post Number: 9 Registered: 06-2008
Rating: N/A Votes: 0 (Vote!) | Posted on Saturday, February 13, 2010 - 04:26 pm: |
|
Hi there, The folding mechanism on my Vito feels a bit rough, and sticks when closing. you need to wiggle it a bit to get it to close. Other than this, the camera is working well, it only happens closing, not opening. Any ideas? Thanks Rob |
David_nebenzahl
Tinkerer Username: David_nebenzahl
Post Number: 151 Registered: 12-2009
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, February 14, 2010 - 01:09 pm: |
|
Looking at my Vito II (which opens and closes very easily), I'd say that if I had the problem you describe, I'd first check to see if the lens standard braces weren't bent or twisted. Look at them from the front edge-on and make sure they look flat. If they are bent, you might be able to straighten them by gently prying with a screwdriver or other tool. (Be careful of the bellows.) Otherwise, I'd consider putting just a little dab of grease on the two pins that hold the braces together, top and bottom, where it slides against the braces. That should help ease things. Just a little bit should do it. |
Blacknoise
Tinkerer Username: Blacknoise
Post Number: 10 Registered: 06-2008
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, February 14, 2010 - 02:25 pm: |
|
The braces were slightly bent, ive bent them back just a little with a small pair of pliers. Seems to have made a fair bit of difference. The mechanism still isnt quite as smooth as some of my other folders, but its more than adequite. Thanks a lot for the pointers, they were very helpful. Rob |
|