| Author |
Message |
    
Padma61ta
Tinkerer
Username: Padma61ta
Post Number: 1
Registered: 10-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, October 27, 2010 - 04:22 pm: | 
|
Hi i'm new here,
just got Canonet QL17. After read the repair manuals doc from here manage to open top cover and adjust the RF horizontal and vertical.
However when taking shoot with it the picture is not focus. Doing some shoot test when shooting target at 2m the focus is sharp at 1.2m ( taken at f1.7 , f2 , f2.8 ).
Anything i can do to fix this problem ?
Thanks |
Waynemel
Tinkerer
Username: Waynemel
Post Number: 174
Registered: 08-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, October 29, 2010 - 08:33 am: |
|
You need to make sure that the focus is correct at the film plane, then adjust your rangefinder.
Look in the "Articles" section of this site and under the "Test Equipment" section you will see instructions for a collimator (focus checker). |
Padma61ta
Tinkerer
Username: Padma61ta
Post Number: 2
Registered: 10-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, November 06, 2010 - 03:35 am: |
|
Thanks,
Focus checking at short distance using backing paper as ground flass fix it. |
