| Author |
Message |
    
Nhanimator
Tinkerer
Username: Nhanimator
Post Number: 1
Registered: 12-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, December 03, 2010 - 07:10 am: | 
|
Just picked this unit up used. All appears okay except for the drive belts which are worn. The smallest broke and I was able to replace it with an o-ring I got at an auto parts store. But the larger ones are a problem (slipping/loose) and I do not know their sizes. Does anyone have a source for purchasing replacements? Thanks in advance. John |
M_currie
Tinkerer
Username: M_currie
Post Number: 245
Registered: 07-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, December 03, 2010 - 09:02 am: |
|
If O-rings work, or if the belts are only stretched but not cracked, one possibility might be to cut one and rejoin it with super glue. There are even kits (probably too expensive for this purpose) for making your own custom O-rings this way.
Some automotive oil filters use big o-rings. I once got a Wollensak tape recorder working using the oil filter O-rings from an old Mercedes diesel. |
Brcamera
Tinkerer
Username: Brcamera
Post Number: 63
Registered: 08-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, December 03, 2010 - 10:32 am: |
|
I have new belts for many projectors. As for your DeJur, my guide shows several sizes and only lists an 86Z projector so if you give me the circumference of the belts you need I can check my stock.
Thanks.
Bill |
Nhanimator
Tinkerer
Username: Nhanimator
Post Number: 2
Registered: 12-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, December 03, 2010 - 03:15 pm: |
|
Thanks for the feedback. May explorer the cut and paste routine. Regarding which belts I need: I'd like to replace them all. Could I get pricing on a set? I will try to find sizes on them (before I cut them). Thanks again. |
Brcamera
Tinkerer
Username: Brcamera
Post Number: 65
Registered: 08-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, December 03, 2010 - 05:08 pm: |
|
Sure, just PM me the details on the sizes, and I will let you know..
Bill |
