Flexaret V1 Film door

Log in | Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Turves Tinkerer Username: Turves Post Number: 1 Registered: 06-2009 Rating: N/A Votes: 0 (Vote!) Posted on Monday, April 18, 2011 - 05:48 am:        I have 2 x Flexaret V1s, one works but leaks light. The other has a better film door but is not a goer. How do you remove the Door from the Flexaret V1. Does it require a tool or does it just unscrew? Also in the door is a Gap, Should it have a foam seal in it? Thanks for any help.   Vinzenz Tinkerer Username: Vinzenz Post Number: 48 Registered: 06-2008 Rating: N/A Votes: 0 (Vote!) Posted on Thursday, May 05, 2011 - 05:08 pm:        There is a silk seal at the bottom of the door near the hinge. To unlock the door remove the two screws with ''leather'' tops on both sides of the hinge. You can then push or unscrew the metall shaft inside the hinge. Vinzenz

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and moderators may post messages here. Password: Options: Enable HTML code in message Automatically activate URLs in message Action: