| Author |
Message |
    
Frogtrouble
Tinkerer
Username: Frogtrouble
Post Number: 1
Registered: 02-2011
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2011 - 09:01 am: | 
|
Hi everyone,
Can't seem to find Voigtlander Bessa 2 specific information for my question so I'm posting it directly instead.
I just purchased a Bessa 2 in incredibly good shape, the only niggling thing is that the vertical component of the rangefinder is out of alignment by about one half of the overlapped image... though I guess I will have to check the accuracy of the distancing as well.
Anyhow, has anyone done this or do they have information that can be shared concerning the topic? I've found articles concerning the adjustment of Bessa 1 rangefinders easily enough, but this is *different* in appearance right from the very beginning and I could use a little helpful advice.
Thanks in advance!
Mike. |
Rsosa
Tinkerer
Username: Rsosa
Post Number: 1
Registered: 06-2011
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, June 02, 2011 - 05:13 pm: |
|
Mike, here goes a bump for this thread
I have a bessa II and would like to get all the info i can for it.
cheers
rodrigo |
Old_school
Tinkerer
Username: Old_school
Post Number: 61
Registered: 04-2011
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, June 02, 2011 - 10:55 pm: |
|
I found this for you guys, I did not see the pictures on the first, but the second has an image. Maybe you can take it from here & pst what you find. I will kep looking as I ran across it a while back & did not think I would need it.
The Best, Mike...
https://kyp.hauslendale.com//forums/showthread.php?p=293419
http://www.imagere.com/paulwolff/rd1.htm |
Msiegel
Tinkerer
Username: Msiegel
Post Number: 249
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, June 03, 2011 - 04:07 am: |
|
Hi,
I found this one:
http://photo.net/classic-cameras-forum/00JtE7?start=0
Maybe it helps |
