| Author |
Message |
    
Tomw
Tinkerer
Username: Tomw
Post Number: 21
Registered: 03-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, May 07, 2013 - 10:27 am: | 
|
I have an FE2 that works great, but the match needle that shows the selected shutter speed (the green needle) does not align with the numbers on the scale in the viewfinder. For example, when the shutter speed dial is set to 250, the needle is positioned between 250 and 125. Can this be adjusted (relatively) easily? |
Brcamera
Tinkerer
Username: Brcamera
Post Number: 272
Registered: 08-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, May 07, 2013 - 11:50 am: |
|
Yes, it can be adjusted, but not easily. You have to remove the top cover and the shutter speed control unit/meter assembly, not trivial and the meter is easily damaged if you are not careful. Probably best to live with the issue unless the camera needs service at some time later and is taken apart..
Bill |
Tomw
Tinkerer
Username: Tomw
Post Number: 22
Registered: 03-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, May 07, 2013 - 01:56 pm: |
|
Thanks, Bill. If that's the case, I'll just live with it. Appreciate the info! |
|
