| Author |
Message |
    
Manmcg2012
Tinkerer
Username: Manmcg2012
Post Number: 18
Registered: 05-2013
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, June 14, 2013 - 04:30 pm: | 
|
does anyone know why the view window is moving..has it came loose inside the top housing,,, if so do i take the top housing off to see if anything needs tightend or is the screws on the side have anything to do with holding it firm in place |
Lloydy
Tinkerer
Username: Lloydy
Post Number: 1
Registered: 07-2013
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, July 09, 2013 - 05:01 pm: |
|
I think it is fairly common on this camera, which is why I was given one.
I removed the top plate - two screws I believe? - and cleaned the old glue gunk off, then glued the viewfinder back in with strong double sided carpet tape, and a tiny bit of foam packing. From memory I taped the viewfinder to the top plate and used the foam underneath to maintain some pressure to keep it in place. It really was that simple, and effective. |
Manmcg2012
Tinkerer
Username: Manmcg2012
Post Number: 41
Registered: 05-2013
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, July 12, 2013 - 01:36 pm: |
|
Where did you get the strong double sided tape |
|
