| Author |
Message |
    
Stuart Willis
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, March 09, 2004 - 03:52 am: | 
|
This is the German rangdefinder model with the film advance lever at top left. Removal of latter is straight-forward. But the RH side of the top-plate is being held obscurely.
There are three possible options and if I get either one wrong - something will break.
It is clear that the frame-counter on the RH hub stays with the chassis and that the milled bezel around it stays with the top-plate.
Has anybody been this route with an Iloca Rapid B ?
Thanks all |
Dan Mitchell
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, March 09, 2004 - 09:02 am: |
|
Remove the spring clip around the film counter and lift the counter plate off. There is a screw underneath.
I have a repair article on this camera on my website:
http://daniel.mitchell.name/cameras/rapidb/rapidb.html |
Harv Jenkins
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, March 12, 2004 - 09:34 am: |
|
If you're in need of a donor camera check my
recent posting in the swaps. |
Stuart Willis
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, March 13, 2004 - 08:06 am: |
|
Daniel ...
I express my respect and admiration for what is one of the best camera-service webpages I have ever seen. Others who may not be particularly interested in the Iloca - might do well to see a very carefully engineered knowledge-transfer classic.
Many thanks
Stuart Willis
ethos@uq.net.au |
Peter
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, June 30, 2006 - 08:00 pm: |
|
Dan,
I wanted to add another thanks for your fantastic site! One of the best step-by-step repair pages I've used... Got the (seemingly impossible) job done in a matter of minutes following your instructions!
Thanks again!
Peter |
