| Author |
Message |
    
Jrc4711
Tinkerer
Username: Jrc4711
Post Number: 1
Registered: 04-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, April 17, 2010 - 04:46 am: | 
|
I want to do a CLA on my Rolleicord. I managed to do the front without any problems but how do I get behind the sidepanel? I have figured out how to unmount the focus knob but not the film advance knob. How do I get there? |
Dirbel
Tinkerer
Username: Dirbel
Post Number: 34
Registered: 04-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, April 17, 2010 - 05:07 am: |
|
There is a screw under the brass disc in the center of the advance knob. You have to pry out the brass disc somehow.
BTW, you can find a repair manual in the 'Repair Manuals' section of this site. It only covers the Rolleicord Va and up, but you might get some hints.
Dirk |
Rick_oleson
Tinkerer
Username: Rick_oleson
Post Number: 1084
Registered: 07-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, April 17, 2010 - 12:57 pm: |
|
Once on a Mamiya, I drilled and tapped a small hole in a similar plate and threaded a screw into it to jack the plate off. |
Mareklew
Tinkerer
Username: Mareklew
Post Number: 57
Registered: 03-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, April 17, 2010 - 05:18 pm: |
|
BTW: At least on Rolleicord Vb you don't need to remove film advance knob to remove side panel. Check it.
Marek |
