| Author |
Message |
    
Arthurq
Tinkerer
Username: Arthurq
Post Number: 1
Registered: 05-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, May 09, 2010 - 10:04 pm: | 
|
I've taken apart a few rangefinders, but this guy has stymied me.
there are no obvious unscrewables or unclippables :/
http://www.dantestella.com/technical/mfrf/iiiseries.jpg |
Socaljc
Tinkerer
Username: Socaljc
Post Number: 4
Registered: 05-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, May 10, 2010 - 01:33 am: |
|
go to Home Depot and buy a good pair of rubber gloves. Hold on to the lever with one hand while it's in its neutral position. Use the other gloved hand to twist open the black ring on top of the lever. The ring and the silver button on top of it will come off easy.
|
Arthurq
Tinkerer
Username: Arthurq
Post Number: 2
Registered: 05-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, May 10, 2010 - 09:47 pm: |
|
Great thanks. I was trying that, but not hard enough obviously.
Now comes the real issue: I took it apart 'cause something was rattling around in there.
this is what I found In front of the triangle formed by the frameline window and reflector: Great thanks. I was trying that, but not hard enough obviously.
Now comes the real issue: I took it apart 'cause something was rattling around in there.
And this is what I found In front of the triangle formed by the frameline window and reflector:
http://reprisal.ca/fuji/2.jpg
in there:
http://reprisal.ca/fuji/1.jpg
What is it and where does it go?
thanks again. |
Socaljc
Tinkerer
Username: Socaljc
Post Number: 8
Registered: 05-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, May 11, 2010 - 10:42 am: |
|
that part I don't know... get a repair / service manual. It's not too hard to find. |
