    
Nico
Tinkerer
Username: Nico
Post Number: 58
Registered: 07-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, April 08, 2012 - 04:24 pm: | 
|
Hi everybody! After a very long time being working in many other things, I could finally spend some hours finishing this out. First I want to say thank you very much to Olympfix and specially to Msiegel who was very kind translating that german text for me.
Thanks to your help and some others in the forum I could successfully install the mirror box in the correct position and retention it well.
Now, when everything looked OK and ready to shot I discovered that the shutter mechanism has a problem too: It stucks open everytime you shoot at speeds form 1 sec to 1/4, while faster speeds and B seems perfect to me. The blade remains open until you set the speed to any other of the speeds that works. Before any assumption blamed the mirror box coupling for this I tried firing WITHOUT the mirror box and it happens the same, so it's definitely the Shutter Mech.
I tried to run some lighter fluid trough it but it didn't helped, and later a deep sink with same results.
I think it has something to do with the retaining time clockwork but I don't want to start disassembling things and loosing springs and gears all around.
Anyone had experienced this symptom?
If not, where do you recommend I should start unscrewing things?
Thanks a lot! |
