| Author |
Message |
    
Waaaaste
Tinkerer
Username: Waaaaste
Post Number: 11
Registered: 04-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 18, 2009 - 01:11 pm: | 
|
I just received the top cover for this Ricoh KR10 Super. Now I just need a little guidance as to how to remove the shutter speed dial. Does anyone have any suggestions? |
Waaaaste
Tinkerer
Username: Waaaaste
Post Number: 12
Registered: 04-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 18, 2009 - 01:25 pm: |
|
For that matter, there's also the small matter of the film advance lever. |
Donnie_strickland
Tinkerer
Username: Donnie_strickland
Post Number: 61
Registered: 09-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 18, 2009 - 03:55 pm: |
|
There should be a small screw or screws around the perimeter of the SS dial. Loosen these, making note of the dial setting as you do so. Lift the dial off.
Remove the screw on the underside of the wind lever. Remove the plastic cover. This exposes the metal part of the lever; remove the screw in the center (it might be left-handed threaded).
As you can probably see the ASA dial under the rewind crank is held on by a snap ring. |
Waaaaste
Tinkerer
Username: Waaaaste
Post Number: 13
Registered: 04-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 18, 2009 - 04:19 pm: |
|
Got it. Thank you Donnie.
Rob |
Donnie_strickland
Tinkerer
Username: Donnie_strickland
Post Number: 62
Registered: 09-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 18, 2009 - 07:07 pm: |
|
Glad to hear it. Good work! I like those old Ricoh/Sears models (mine is a Sears KS Super). |
