| Author |
Message |
    
Onesfist
Tinkerer
Username: Onesfist
Post Number: 1
Registered: 10-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, October 27, 2009 - 08:12 am: | 
|
I tried to unscrew the numbered shutter speed dial to clockwise many times using filed niddle pliers. but, I never couldn't get off.
then, I drilled two small holes in the shutter speed dial slots and tried to unscrew clockwise
using small pin.
but, I couldn't get off, too.
Is there any way to remove the numbered shutter speed dial easily?
Please help~ I need repair manual or good tips. |
Upnorthw
Tinkerer
Username: Upnorthw
Post Number: 13
Registered: 01-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, October 29, 2009 - 04:48 pm: |
|
The screw in the pointer dial is RH threads. The slotted nut under that has LH threads. I took a large straight blade screwdriver and angle ground the outer edges and notched the center. Wind the shutter first, then try to get it loose. Then fire the shutter and finish unscrewing it. Good luck and make sure you check the shutter curtains for pin holes. |
Onesfist
Tinkerer
Username: Onesfist
Post Number: 2
Registered: 10-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, October 31, 2009 - 07:54 am: |
|
Thanks for good informaion.
I tried again. but,I couldn't..
Maybe, it screwed very hard because of too old. |
|
