| Author |
Message |
    
Sangetsu
Tinkerer
Username: Sangetsu
Post Number: 5
Registered: 05-2011
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, May 15, 2011 - 05:45 pm: | 
|
I've accumulated a few boxes of non-functioning Yashia CC, GX, and Canon QL17 cameras. None have good lenses, but I have clean top and bottom covers, levers, screws, buttons, etc. Let me know what you might need. |
Waynemel
Tinkerer
Username: Waynemel
Post Number: 67
Registered: 08-2009
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, May 25, 2011 - 11:10 am: |
|
I am looking for the plastic battery compartment for a QL17. Mine has been corroded right through. Is that something you would have? |
Noll
Tinkerer
Username: Noll
Post Number: 1
Registered: 07-2011
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, July 14, 2011 - 05:12 pm: |
|
I can really use a film rewind knob & washers for the Yashica CC. Mine fell off recently, apparently due to the fact that I didn't screw it on tight enough after removing it to clean the rangefinder. |
Rick
Tinkerer
Username: Rick
Post Number: 1
Registered: 06-2012
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, June 11, 2012 - 01:29 am: |
|
Would anyone have an extra Battery Adapter BAT81S for GIIIQL17 by any chance will pay whatever you would want? |
Hollenbj
Tinkerer
Username: Hollenbj
Post Number: 59
Registered: 03-2012
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, June 11, 2012 - 12:16 pm: |
|
Another rather good Canon QL17 GIII here too. I'll send to any forum member for cheap (shipping and maybe $5 - $2 or so; or haggle with me for even cheaper). Shutter does not operate, but I didn't bother troubleshooting because I have a couple nice QLs already. Yes, battery compartment is complete. Lens is perfect. Only missing part is frame counter window (that I know of). |
Rick
Tinkerer
Username: Rick
Post Number: 4
Registered: 06-2012
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, June 11, 2012 - 09:58 pm: |
|
Hollenbj Did you say there was an Adapter in the QL17 GIII the adapter that is made by FJ de GRUIJTER his BAT 81S? If so can I buy it and if you do have one will buy the QL17 GIII parts possibly as I live quite a ways away. But if you do have the Battery adapter tell me how much. |
Rick
Tinkerer
Username: Rick
Post Number: 5
Registered: 06-2012
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, June 11, 2012 - 10:01 pm: |
|
Hollenbj Did you say there was an Adapter in the QL17 GIII the adapter that is made by FJ de GRUIJTER his BAT 81S? If so can I buy it and if you do have one will buy the QL17 GIII parts possibly as I live quite a ways away. But if you do have the Battery adapter tell me how much. |
Rick
Tinkerer
Username: Rick
Post Number: 6
Registered: 06-2012
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, June 11, 2012 - 10:01 pm: |
|
Hollenbj Did you say there was an Adapter in the QL17 GIII the adapter that is made by FJ de GRUIJTER his BAT 81S? If so can I buy it and if you do have one will buy the QL17 GIII parts possibly as I live quite a ways away. But if you do have the Battery adapter tell me how much. |
Hollenbj
Tinkerer
Username: Hollenbj
Post Number: 60
Registered: 03-2012
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, June 13, 2012 - 04:16 pm: |
|
Rick,
I'm not exactly sure what the battery adapter is that you're interested in, but my body does not have an adapter. Sorry.
The QL17 used one PX625(or equivalent) battery. If you're trying to use a modern non-mercury battery (e.g., zinc-air or maybe a silver oxide) it shouldn't be a problem. Just match the voltage as best as possible (I'm sure to hear about discharge curves now) and use shims to get a good fit with contact in the battery chamber. I've rigged hundreds of cameras this way (well, at least 50).
Perhaps the battery adapter you're after is something else entirely? |
Luck00
Tinkerer
Username: Luck00
Post Number: 2
Registered: 06-2012
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, June 27, 2012 - 12:18 am: |
|
Hi,
I am interested in a copal sv shutter, from a QL17. Do you have one?
Thx |
Hollenbj
Tinkerer
Username: Hollenbj
Post Number: 67
Registered: 03-2012
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, June 29, 2012 - 08:21 pm: |
|
Luck00,
I have a non-functioning Canonet QL17 GIII. It has a Copal shutter, but I'm not sure if its a Copal SV. The camera doesn't work, but I doubt the shutter is bad. However, I really don't know because I haven't disassembled it (I already have a perfect QL17 and QL19). Its available. |
Jorgea
Tinkerer
Username: Jorgea
Post Number: 1
Registered: 07-2012
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, July 29, 2012 - 07:50 pm: |
|
Can you list all the parts that are available? |
Hollenbj
Tinkerer
Username: Hollenbj
Post Number: 75
Registered: 03-2012
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, July 30, 2012 - 01:25 pm: |
|
Jorgea,
The QL17 went to Luck00. If I uncover another one, I'll post its availability here. I do need to reduce the number of non-working, redundant, equipment I have. |
