| Author |
Message |
    
John Kendall
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, May 31, 2006 - 01:26 pm: | 
|
Hi everyone
I've got a problem with a Canon AE Finder FN. It no longer shows the shutter speed meter. It showed at an angle a couple of times but now its gone altogether. At the moment I can't get inside the finder, there are 4 screws that seem to hold on the outer cover. But take those out and it still won't budge. Do I have to take off the eyepiece shutter lever? If so how, it appears to be very solidly attached.
Thanks I hope someone can help
John |
Doug
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, June 01, 2006 - 12:10 am: |
|
Hello John
You have a bit to go to take the top off,
1/ The two buttons on the side have to be unscrewed, there set in a ring that unscrews, difficult if you do not want to mark them, try a rubber pad.
2/ The lever that operates the bind has to come off, remove the small rubber insert.
3/ On the eyepiece, there is a mask inside the ring this has to come out, it is glued in, it is very thin a easily bent so use care, when it comes to refitting it look at it carefully as one side of it is wider than the other.
4/ Remove the 4 screws that can now be seen....and you are there.
Best of luck
Doug |
John Kendall
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, June 01, 2006 - 12:21 am: |
|
Many thanks Doug. I'll try that and see how I get on.
I might need that luck
John |
|
